MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.
Python
Commits on main
Unify dual-shoulder CAD assembly and controller setup guide (#11)
14a67fc metr0x committed 23 days ago
Publish SO-101 dual-servo shoulder R2 CAD and assembly guide (#10)
c41f896 metr0x committed 23 days ago
arm reach: the gripper within 10 degrees of vertical (a gripper tilted 20-30 degrees forward rests on the can), the most vertical pose wins a tie
6750e4c metrox committed 26 days ago
base adapter: MOSS_TRACK_SIGN, the track polarity on the wire and on the raw ticks (the twist path drove the rover backwards; the pad had been inverted instead); bench 200
eb873ec metrox committed 26 days ago
arm: aim the cycle at a point on the floor (moss_arm_pick_at: floor pose + the pose above from the reach table; zero contact in the CAD scene at (0.28, -0.08)); the direct player takes --poses
623e59f metrox committed 26 days ago
arm reach: ties go to the pose nearest pick_low in joint space (not the arm bent backwards over the robot)
49269d5 metrox committed 26 days ago
arm: the floor the gripper reaches (every allowed pose posed in the CAD scene, jaws just above the floor) and a direct cycle player without the coordinator
1be4ea4 metrox committed 26 days ago
mission: one LitterMission class per process, picklable by reference (dimOS workers could not get the local class)
a8bdb57 metrox committed 26 days ago
arm: register the feetech_so101 adapter path from moss_dimos.arm too (the coordinator's process resolves the name in its own registry)
8a1af5c metrox committed 26 days ago
litter probe: read robot.env first, like the launcher (same camera origin as the stack); bench 35
3c25f79 metrox committed 26 days ago
Update MOSS BOM, group spacer plates and unify infill settings
6eb789b metrox-eth committed 26 days ago
Merge dimos-standalone into main: the pad drives from the battery switch, the GameSir receiver (ds4 layout, auto pick), the speaker on the Jetson's I2S2, the louder sound pack, docs and changelog for 24 October
a18704e metrox committed 26 days ago
docs: the pad drives from the battery switch, the speaker on the Jetson's I2S2 (MAX98357A), robot.env on MOSS_PAD_LAYOUT=auto; changelog entry for 24 October
06f0115 metrox committed 26 days ago
sound pack: every cue normalised to -1 dBFS peak (they sat at -12 dBFS, 11 dB below what a small amplifier can give); keep_awake stays silent
d73b1de metrox committed 26 days ago
gamepad: ds4 layout (a DualShock 4 to the kernel, the GameSir receiver's DInput mode) and MOSS_PAD_LAYOUT=auto, picked from the pad's kernel name; the launcher names the GameSir receiver's XInput mode (no Linux driver) and the pad-less receiver
1950103 metrox committed 26 days ago
teleop at boot: tools/moss-teleop.service runs tools/moss-teleop-boot.sh, which retries the launcher until the pad and the board are there, then leaves the stack running
8364950 metrox committed 26 days ago
gamepad: MOSS_PAD_INVERT_Y / MOSS_PAD_INVERT_TURN flip a stick whose sign is the other way round (a pad that reports stick up as positive)
a697a19 metrox committed 26 days ago
gamepad: no deadman by default, the sticks drive (MOSS_PAD_DEADMAN=r1 brings the held button back); launcher, flight check and docs follow; blueprints bench on the measured 0.32 m/s plateau
d1bf892 metrox committed 26 days ago
Update mechanical package contents and Jetson supplement status
d288647 metrox-eth committed 1 month ago
Add ready-to-print projects and complete the grouped R92 package
8c796b8 metrox-eth committed 1 month ago
Synchronize the hardware print catalogue with the grouped guide list
95ab536 metrox-eth committed 1 month ago
Group identical print parts and supply missing Jetson retaining tabs
fdb04ad metrox-eth committed 1 month ago