Free, open-source 3D sculpting for Linux, macOS and Windows: dense meshes, remeshing, painting, built-in AI (image/text to 3D), Send to Unreal, game-ready LODs, Gaussian splats and OpenUSD.
Moving, rotating and posing (Gizmo)
The Gizmo moves, rotates and scales a whole Part, or only the part of it you haven't masked. Use it to place parts (an eye in its socket, a sword in a hand), to fix proportions, and to pose: mask the body, put the pivot at the shoulder and swing the arm. It works, with the same keys.

The modes
Press a key, or click the button on the top shelf (they're also in Sculpt > Symmetry & Gizmo):
| Key | Mode | What you drag |
|---|---|---|
| W | Move | An arrow moves along that axis. A square moves in its plane. The ring in the centre moves freely in the view plane |
| E | Scale | A box stretches along that axis. The disc in the centre scales evenly: drag right or up to grow, left or down to shrink |
| R | Rotate | A ring turns about that axis. The outer white ring turns about the view direction |
| Shift+W | All | Every handle at once: see All handles at once |
| Q | Draw | Back to sculpting: brushes work again and the gizmo goes away |
Pressing the same key again also goes back to Draw. X is red, Y green and Z blue; the handle under the cursor turns yellow. While the gizmo is on, dragging anywhere off its handles still turns, pans and zooms the view, and Ctrl still paints the mask, so you can mask and move without leaving the gizmo.
While you drag, the amount shows beside the gizmo (the distance, the angle or the percentage), and a rotation draws the swept angle as a slice. Each drag is one undo step (Ctrl+Z), and the gizmo goes back with it.
All handles at once
All (Shift+W, or All beside Rotate) puts move, rotate and scale on one gizmo, so you can place, turn and size a part without switching modes:
- Short arrows and squares inside the rings move, and the ring in the centre moves freely, as in Move.
- The rings turn about each axis and the white ring around them turns in the view, as in Rotate.
- A box on an axis line, just outside the rings, stretches along that axis. It hides while its axis points straight at you (it would sit on the rings); turn the view a little to bring it back.
- The four gold tabs on the outside scale evenly: drag right or up to grow, left or down to shrink.

Where handles cross, the one you see on top is the one you get: the centre first, then the boxes and the tabs,
then an arrow or a square over a ring. Snapping, the readout, posing with a mask, Alt+drag for the
pivot and one undo step per drag all work as in the single modes. Scripts switch modes with
gizmo_mode mode=all (or move, scale, rotate, draw); like every action, All can take another key in
Edit > Preferences > Hotkeys.
Snapping
Hold Shift while dragging to snap:
- Rotate: 15 degree steps.
- Move: whole steps of the grid, a round number about a twentieth of the model's size (0.1, 0.2, 0.5, 1...).
- Scale: 10% steps.
You can press and release Shift during the drag.
Moving only part of a Part
The gizmo respects the mask: masked parts stay where they are, partly masked parts move partly, and hidden parts never move. To move only the head of a figure, mask everything else (or paint the mask on the head and invert it with Ctrl+click on the background), then drag.
Turn Mask off in the Gizmo panel to move the whole Part whatever the mask.
Posing a limb
- Mask what should stay: for an arm, everything but the arm (Ctrl+paint, or Lasso Mask).
- Press R. The gizmo jumps to the centre of the unmasked arm.
- Put the pivot at the joint: hold Alt and click the model at the shoulder or elbow. (Or click To Surface, then click the model.)
- Raise Falloff in the Gizmo panel, for example to 15%. The turn then eases in over that distance from the mask's edge, so the joint bends smoothly instead of creasing along the mask line.
- Drag a ring. Release, then drag again to refine; each drag is its own undo step.

Falloff only ever eases in on the unmasked side: the masked part stays exactly where it was. It is measured along the surface, as a share of the Part's size, so it bends the same way on a rough model and on one with millions of polygons.
Symmetry
With X, Y or Z symmetry on (top shelf), a masked transform is mirrored: the unmasked part on the other side of the symmetry plane takes the mirror image of the move, so both arms rise together. This needs a mask and a pivot off the plane; a Part moved as a whole just moves.
The pivot
The pivot is the point rotation and scaling turn about, and where the gizmo sits. It starts at the centre of what will move (the Part, or its unmasked part) and follows it when you change the mask or pick another Part.
| To | Do this |
|---|---|
| Move the gizmo without moving the model | Alt+drag any Move handle |
| Turn the gizmo's axes without turning the model | Alt+drag a Rotate ring (the axes switch to Surface) |
| Put the pivot on the surface | Alt+click the model, or To Surface then click the model |
| Type the pivot | The three numbers under the mode buttons in the Gizmo panel |
| Go back to the centre, with world axes | Reset |
After a drag the gizmo moves (and with Surface axes, turns) with what it moved.
World or Surface axes
World keeps the gizmo's arrows and rings on the world's X, Y and Z. Surface lines them up with the surface where you put the pivot (Y along the surface normal) and turns them with your rotations, which is handy for sliding a part along itself, or for twisting a forearm about its own length.
Typing exact values
The Gizmo panel opens in the corner of the canvas while the gizmo is on. Under the options it has Move (X, Y, Z), Rotate (degrees about X, then Y, then Z) and Scale (percent). Type the amounts and click Apply: the model moves, turns and scales by them about the pivot, along the gizmo's axes, in one undo step. Clear sets them back to 0 and 100%. The values stay after Apply, so clicking Apply again repeats the step (rotate by 15 degrees, again, again).
All Parts
Turn on All Parts in the panel to move every visible Part together, for example to turn a whole character with its eyes, teeth and clothes. The pivot is the centre of all of them. Each Part gets its own undo step: undo goes back in the active Part, and selecting another Part undoes its part.
Folder, beside it, moves the visible Parts in the active Part's folder together, for example both eyes. Right-click a folder's header in the Parts list > Move with the gizmo turns it on for you.
What a transform keeps
A transform only changes where the vertices are. Face Groups, quads, UVs, vertex paint, textures, the mask and the topology stay as they are. With Base mesh active, sculpt layers move with the surface: the base and every layer's offsets are transformed together, so a layer you sculpted on a forearm stays on it after posing, and layer sliders keep working. With a sculpt layer active, the transform goes into that layer, like a stroke: the base stays, and the layer's weight dials the move in and out (a pose as a blend shape). A layer whose weight is 0 can't be transformed into. With subdivision levels you can pose at a low level: the detail of the higher levels, sculpt layers included, turns with it when you step back up. Projects save the result, and the gizmo's pivot and options too.
Scripting
Every gizmo drag appears in the console as the transform command that repeats it, so Copy session as
script replays your posing. You can also type it, or use it in scripts and sculptforge-cli:
transform translate=0,0.5,0
transform rotate=0,0,45 pivot=1.2,0.4,0 falloff=0.15
transform scale=2 all=true
| Parameter | Meaning |
|---|---|
translate |
Movement x,y,z in world units |
rotate |
Degrees about X, then Y, then Z (of orient) |
scale |
One number, or x,y,z along the axes of orient (above 0) |
pivot |
center (default: the centre of what moves), origin, or x,y,z |
orient |
world (default), or the axes as x,y,z Euler degrees |
masked |
true (default) leaves masked parts; false moves everything |
falloff |
Soft joint width as a share of the size, 0-1 (default 0) |
symmetry |
Mirror a masked transform across these planes, e.g. x |
all |
Every visible Part, moved, rotated and scaled together |
Speed
The gizmo recomputes every frame from where the drag started, touching only the vertices that move, and sends only the changed range to the graphics card. On a 1.3 million triangle model a drag frame takes about 2 ms to transform plus about 7 ms to upload, and the release about 20 to 40 ms; undo is as fast.