Skip to content

Free, open-source 3D sculpting for Linux, macOS and Windows: dense meshes, remeshing, painting, built-in AI (image/text to 3D), Send to Unreal, game-ready LODs, Gaussian splats and OpenUSD.

29.4 KB
Raw Blame

Keyboard and mouse

This chapter is the reference for every default keyboard shortcut and mouse gesture in SculptForge. Inside the app, F1 opens the same list as the Controls window, showing your own keys if you've changed any.

SculptForge has four key styles, chosen in Edit > Preferences > Input > Style (and by the Coming from question the first time SculptForge starts): SculptForge (the default for new installs), Classic, Blender and Maya. The main table shows the SculptForge style; the sections after it list what the classic and Blender styles change. If you used an earlier version, your saved style is kept.

Changing shortcuts

Every key below can be reassigned: hold Ctrl+Alt and click a button, then press the new key, or use Edit > Preferences > Hotkeys. Your changes save themselves. See Customizing the interface.

On macOS, Cmd works wherever a shortcut says Ctrl. Single-letter shortcuts don't fire while you type in a text field.

Keyboard shortcuts

The table lists the default shortcut of every action in the SculptForge style, grouped by palette. It is generated from SculptForge's action registry, the same source as the Controls window.

Brush

Action Keys What it does
Brush picker B Pop up every brush under the cursor. Type the first letter of a brush, then the orange letter on its tile (B S T = Standard).
Capture from view Ctrl+Alt+C Alpha and VDM from the viewport: drag a square over any sculpted detail (Shift for a circle) and capture it as a grayscale height alpha and as a vector displacement brush, ready to stamp with the VDM brush or along strokes with Detail Clone, and to save in your library.
Clay 2 Builds up clay that fills the hollows first.
Clay Block 0 Square, flat-topped clay strokes for blocking in forms.
Crease 6 Cuts a sharp crease; Alt raises a ridge.
Flatten 7 Presses the surface toward a plane.
Inflate 5 Swells the surface outward along its normals.
Move 4 Grabs the surface under the cursor and pulls it along.
Paste brush Ctrl+V Add the brush on the clipboard: a brush code someone shared, or the text of a .sfbrush file.
Pinch 8 Pulls the surface toward the stroke to tighten edges.
Sharp Crease 9 A sharp V-shaped crease with the sides pinched in.
Smooth 3 Relaxes the surface. Hold Shift to smooth with any brush.
Standard 1 Raises the surface along the stroke; Alt digs in.

Color

Action Keys What it does
Pick colour C Take the paint colour from the model under the cursor.
Switch Color V Swap the main and the secondary colour.

Draw

Action Keys What it does
Falloff at cursor O or I A Falloff slider under the cursor: below 0 a broad, hard brush tip, above 0 a soft point (-100..100). The inner ring of the brush cursor shows it.
Intensity at cursor U An Intensity slider under the cursor: drag it, or type a number (1-100) and press Enter. Hold Shift (or pick Smooth) to set Smooth's own Intensity.
Larger brush ] Make the brush 10% larger (hold to repeat; Shift+] steps one pixel).
Larger brush by 1 px Shift+] Make the brush one pixel larger (half a pixel below 2 px).
Paint P Paint colour without sculpting. Alt paints back to white, Shift still smooths.
Size at cursor S A Size slider under the cursor: drag it, or type a number and press Enter.
Smaller brush [ Make the brush 10% smaller (hold to repeat; Shift+[ steps one pixel).
Smaller brush by 1 px Shift+[ Make the brush one pixel smaller (half a pixel below 2 px), down to 0.5 px.

Edit

Action Keys What it does
Redo Ctrl+Shift+Z or Ctrl+Y Redo the last undone action.
Undo Ctrl+Z Undo the last action.

File

Action Keys What it does
Export GLB... Ctrl+E Export the model as glTF binary, with sculpt layers as blend shapes (morph targets).
New Sphere Ctrl+N Replace the scene with a new sphere ready for sculpting.
Open... Ctrl+O Open a project (.sfproj), a model (.obj, .glb, .fbx, .stl, .ply, .usd ...) or splats.
Quit Ctrl+Q Close SculptForge (asks to save changes first).
Save Ctrl+S Save the project (.sfproj: every Part, layer, brush and setting). Asks for a name the first time.
Save As... Ctrl+Shift+S Save the project under a new name.
Send to Unreal Ctrl+U Export a game-ready FBX and import it into the running Unreal Editor (Python remote execution).

Help

Action Keys What it does
Command palette F3 or Ctrl+Shift+P Search every command, brush and setting by name and run it. Commands that need parameters open in the console.
Controls F1 Every shortcut and mouse gesture, generated from the commands themselves.
Quick Menu Space The Quick Menu under the cursor: brush, stroke, alpha, material, colour, Size, Falloff and the intensities. Hold Space and let go to close it, or tap Space to keep it open.
User Guide Shift+F1 The SculptForge user guide: every tool explained, with search. Hold Ctrl over a control and press F1 to open the chapter about it.

Library

Action Keys What it does
Library , Show or hide the Library: thumbnails of your projects, models, brushes, alphas, materials, images, splats and Snapshots along the top of the canvas. Double-click to load.

Material

Action Keys What it does
Material picker M Pop up the materials under the cursor. Hover one to preview it on the model; click to keep it.

Palettes

Action Keys What it does
Preferences Ctrl+, Open the Preferences palette (click its tray icon to keep it in a tray).

Preferences

Action Keys What it does
Export Interface... Ctrl+Alt+Shift+I Save the layout, shortcuts and interface preferences to a file you can share.
Import Interface... Ctrl+L Load a layout and shortcuts file someone shared (or you saved with Export Interface).
Radial menu 1: Brushes T Hold the key, flick toward an item and let go to run it; or tap the key and click one. Edit it in Preferences > Input > Radial Menus.
Radial menu 2: Masking Y Hold the key, flick toward an item and let go to run it; or tap the key and click one. Edit it in Preferences > Input > Radial Menus.
Radial menu 3: Strokes J Hold the key, flick toward an item and let go to run it; or tap the key and click one. Edit it in Preferences > Input > Radial Menus.
Shelves Tab Hide or show the shelves and trays around the canvas.

Render

Action Keys What it does
Fullscreen F11 Fill the screen with SculptForge (again: back to a window).
Mask Ctrl+H Show or hide the mask (masked areas drawn darker). Hiding it keeps the mask: masked areas stay protected from brushes until you clear it.
Wireframe Shift+F Show the mesh's polygons (quads and triangles) over the surface.

Script

Action Keys What it does
Console ` The script console: every command you run appears as a script line, and you can type commands yourself.

Stroke

Action Keys What it does
Steady Stroke L Steady Stroke on or off, with every stroke type (Dots, Drag Stamp, Slide Stamp, Spray): the brush trails the cursor on a string and only moves once the string is taut, for steady lines without hand shake.
Stroke popup G A grid at the cursor with the stroke types, the modifiers (Add / Sub, Smooth, Mask, Select) and the mask and Cut shapes. Hold the key, point at one and let go; or tap the key and click. Smooth, Mask, Select and the shapes stay on without holding Shift or Ctrl, until you pick them again or another brush.

Tool

Action Keys What it does
Add Level Ctrl+D Non-destructive: add a subdivision level: four times the polygons, and the lower levels are kept, so you can step down to shape big forms and back up to the detail. Quads stay quads (Catmull-Clark). Smooth off divides without smoothing.
Clear Mask Ctrl+Shift+A Unmask everything (also: Ctrl+drag on the background, away from the model).
Duplicate Part Ctrl+Shift+D Copy the active Part, with its layers and attributes, and make the copy active (also in the Parts list's right-click menu).
Group from Mask Ctrl+W Turn the masked part into a new face group and clear the mask. With nothing masked, everything visible becomes one group.
Higher Level D Step one subdivision level up (more polygons, for detail). Edits made below carry the detail along.
Invert Mask Ctrl+I Mask what is unmasked and unmask what is masked (also: Ctrl+click the background).
Lower Level Shift+D Step one subdivision level down (fewer polygons, for big forms). The detail of the higher levels is kept.
Mask All Ctrl+A Mask the whole visible Part.
Preview A Show the skin Make Mesh would build instead of the spheres. Turn it off to edit the spheres again.
Quick Remesh Shift+R With Tool > Remesh > Quick Remesh on: remesh the active Part at the Voxel Remesh resolution, in the background.
Quick Remesh (hold and drag) N With Tool > Remesh > Quick Remesh on: hold this key and click or drag on the background (not on the model) to remesh the active Part.
Sculpt the Part under the cursor Alt+Q Make the Part under the pointer the one you sculpt, without moving the view (each Part keeps its mask). The same key as Blender's; Preferences > Hotkeys changes it.

Transform

Action Keys What it does
All Shift+W Gizmo, All: move, rotate and scale handles at once. Arrows and squares move, the centre moves in the view, rings turn, the boxes past the rings stretch along an axis and the four outer tabs scale evenly. Shift snaps. Shift+W again: back to Draw.
Back view Ctrl+Numpad 1 Look at the model from behind (orthographic).
Bottom view Ctrl+Numpad 7 Look up at the model from below (orthographic).
Draw Q Draw mode: brushes sculpt and paint (leaves the Gizmo).
Frame F Fit the whole model in the view.
Frame Part Numpad . Fit the active Part in the view (Blender: View Selected; Maya keys: Alt+F).
Front view Numpad 1 Look at the model from the front (orthographic).
Left view Ctrl+Numpad 3 Look at the model's left side (orthographic).
Move W Gizmo, Move: drag an arrow to move along an axis, a square to move in a plane, the centre to move in the view. Masked parts stay; Shift snaps to the grid; Alt+drag moves only the gizmo. W again: back to Draw.
Opposite side Numpad 9 Look at the model from the other side.
Orbit down Numpad 2 Turn the view 15 degrees down under the model.
Orbit left Numpad 4 Turn the view 15 degrees to the left around the model.
Orbit right Numpad 6 Turn the view 15 degrees to the right around the model.
Orbit up Numpad 8 Turn the view 15 degrees up over the model.
Orthographic Numpad 5 Switch between a perspective and an orthographic view (no foreshortening: sizes don't shrink with depth).
Restore View Numpad 0 Go back to the view saved or restored last (View > Views).
Right view Numpad 3 Look at the model's right side (orthographic).
Rotate R Gizmo, Rotate: drag a ring to turn about that axis, the outer ring to turn in the view. Mask the body and put the pivot at a joint to pose a limb. Shift snaps to 15 degrees. R again: back to Draw.
Save View Ctrl+Alt+Numpad 0 Remember this camera as a named view (View > Views; the name field names it). Saved with the project.
Scale E Gizmo, Scale: drag a box to stretch along an axis or the centre to scale evenly (right or up: bigger). Shift snaps to 10% steps. E again: back to Draw.
Top view Numpad 7 Look down on the model (orthographic).
X X Mirror strokes across X (left and right).
Zoom in Numpad Plus Move the view closer.
Zoom out Numpad Minus Move the view back.

UV Editor

Action Keys What it does
UV Editor Alt+U Open the UV Editor: the Part's UV layout in 2D over the UDIM tiles. Select vertices, edges, faces or islands (here or on the model), move, rotate and scale them, mark seams, unwrap, pack, set texel density and lay islands into trim sheet strips. Stretch and texel density show live on the model while you edit.

View

Action Keys What it does
Free Alt+Shift+F Rotation drags turn the view about the screen's axes and can roll it over the top (the default). Saved with the preferences.
Lock camera Shift+L Lock the camera for left-drags: a drag that starts on the background sculpts once it reaches the model instead of turning the view (Preferences > Input > Start strokes off the model, #62). The status bar shows CAMERA LOCKED while it is on. Right-drag or Alt+drag still move the view. Shift+L turns it on and off.
Turbo Ctrl+Alt+T Everything this computer can safely give to sculpting speed, in one click: antialiasing off and a lighter view while you sculpt and orbit (full quality the moment you stop), and the top budgets of the tier this machine carries. It never goes past what the memory holds. Off puts everything back as you set it. Remembered on this computer.
X Alt+Shift+X Rotation drags turn the view about the world X axis only (red): from the front, an up or down drag tips the model towards you or away. Shift still snaps to a side view; the axis gizmo shows the lock. Saved with the preferences.
Y (turntable) Alt+Shift+Y Rotation drags turn the view like a turntable: the model stays upright and turns about its vertical (Y) axis. Saved with the preferences.
Z Alt+Shift+Z Rotation drags turn the view about the world Z axis only (blue): from the front, a drag around the middle turns the model like a wheel. Shift still snaps to a side view; the axis gizmo shows the lock. Saved with the preferences.

Mouse and pen gestures

Action Gesture
Sculpt Left-drag on the model
Sculpt from beside the model Turn on Edit > Preferences > Input > Start strokes off the model (or press Shift+L), then left-drag from the background onto the model; the view then turns with a right-drag (see Navigation)
Invert the brush (subtract) Hold Alt while sculpting
Smooth Hold Shift while sculpting (works with any brush, and with Paint)
Straight line Press Shift after a stroke has started (45 degree steps)
Roll the view Shift+click the background, let go of Shift, drag
Rotate Left-drag on the background, or right-drag; hold Shift to snap to an axis view
Pan Alt+left-drag on the background, Alt+right-drag, or middle-drag
Zoom Mouse wheel; Alt+drag on the background then release Alt; Ctrl+right-drag; Ctrl+middle-drag; Ctrl+left-drag on the background when nothing is masked (not in the classic)
Paint the mask Hold Ctrl while stroking on the model
Erase the mask Hold Ctrl+Alt while stroking on the model
Blur / sharpen the mask Ctrl+click / Ctrl+Alt+click the model
Invert the mask Ctrl+click the background
Clear the mask Ctrl+drag on the background with something masked (with Mask Pen), or Ctrl+Shift+A
Mask inside a lasso or rectangle Ctrl+drag with Lasso Mask or Rectangle Mask picked in Tool > Masking (add Alt: unmask)
Isolate a face group Ctrl+Shift+click it (again: invert the visibility; with something hidden already: hide it)
Hide a face group Ctrl+Shift+Alt+click it
Show everything Ctrl+Shift+click the background
Hide outside a rectangle or lasso Ctrl+Shift+drag (add Alt: hide inside); Select Rectangle or Select Lasso in Tool > Visibility
Select a Part Alt+click it in the view (Shift+Alt+click, or a triple-click on another Part: select and frame it)
Sculpt the Part under the cursor Alt+Q (every input style; the view stays put)
Move, scale or rotate with the Gizmo W, E or R, then drag a handle; hold Shift to snap (15 degrees, the grid, 10%)
Move the gizmo only Alt+drag a gizmo handle
Put the gizmo's pivot on the model Alt+click the model in Move, Scale or Rotate mode
Pan, zoom or orbit with a button Drag on Move, Zoom or Rotate on the right shelf
Help on any control Hold Ctrl and point at it (Ctrl+Alt: scripting parameters)
Assign a shortcut Ctrl+Alt+click any button, then press the key
Move or remove shelf items Ctrl+Alt+drag (with Customize Shelves on)
Tablet pressure Used automatically when a pen is detected (Pressure > Strength / Pressure > Size)
Open files Drop a model (.obj, .glb ...), project, brush (.sfbrush), splat capture or image onto the window

Keys inside pop-ups and panels

Some keys only mean something while a pop-up or panel has the keyboard.

Brush picker (B)

Key Action
A letter Keep the brushes whose names start with the letters typed so far
The highlighted letter on a tile Pick that brush (B S T = Standard)
Backspace Take back one letter
Enter Pick the first match
Esc Close

Sliders at the cursor (S, U, I, O)

Key Action
Digits and . Type a value
Enter Apply the typed value and close
Esc Close without applying a typed value

Command palette (F3)

Key Action
Up / Down, Page Up / Page Down Choose a row
Enter Run it
Shift+Enter Open a command with parameters in the console to edit them
Esc Close

Console (`)

Key Action
Enter Run the line (statements separated by ;)
Tab Complete a command or parameter name; press again to list the candidates
Up / Down Walk through earlier lines (the last 200 are remembered between sessions)

Shortcut capture (Ctrl+Alt+click)

Key Action
Any key or chord Becomes the new shortcut (taken from another action if it had it)
Backspace or Delete Remove the shortcut
Esc Cancel

Classic sculpting keys

With Edit > Preferences > Input > Style on Classic, the keys and gestures work. The choice saves itself. Compared with the table above, these change:

To SculptForge style classic
Pick one of the first ten brushes 1 to 9, 0 (Standard, Clay, Smooth, Move ...) No key: the number keys are free
Save Snapshot No key 9
Slider at the cursor on I Falloff (as O) Colour intensity
Ctrl+drag on the background with nothing masked Zooms Draws a mask rectangle (one that misses the model clears the mask)
Zoom drags (Ctrl+right-drag, Alt+drag then release) Up zooms in Up zooms out

Everything else, from the B brush letters and S / U / O to the Ctrl and Ctrl+Shift gestures, is the same in both styles. The Maya style keeps these the Classic sculpting keys and changes only the view controls (Alt+left, middle and right drags).

Maya keys

With Edit > Preferences > Input > Style on Maya (#32), the view works as in Maya, on the model or beside it, as long as Alt is the only key held:

To Maya style
Rotate Alt+left-drag
Pan Alt+middle-drag
Zoom Alt+right-drag sideways: right zooms in, left zooms out, as Maya's own dolly; the mouse wheel zooms toward the pointer
Roll (turn about the view axis) Hold Alt, then add Ctrl, and left-drag left or right
Frame the active Part Alt+F (also Numpad .)
Reset the view Alt+H: from the front, upright, in perspective, the whole model in view
Invert the brush (subtract) Hold Ctrl while sculpting
Paint a mask / erase it Ctrl+Alt+drag / Ctrl+Alt+Shift+drag
Smooth Hold Shift while sculpting
Visibility gestures Ctrl+Shift, as in the other styles

The roll needs Alt first: press Ctrl first (or both together) and Ctrl+Alt masks as before, on the model, and clears the mask beside it.

Edit > Preferences > Input > Wheel zooms toward the pointer (#134) keeps the point of the model under the pointer where it is while the wheel zooms; beside the model it zooms toward the pointer at the model's depth. Choosing the Maya style turns it on and the other styles turn it off (they zoom toward the middle of the view); the box changes it in any style.

Maya's default dolly follows a sideways drag, so that is the default here too. Edit > Preferences > Input > Zoom drag switches it to Up and down (drag up to zoom in) if you set Maya up that way. Invert zoom, in every style, turns zoom drags around (the mouse wheel stays as it is).

Blender keys

With Edit > Preferences > Input > Style on Blender (also at the top of the Controls window, F1), the view and the sculpt keys work as in Blender 4.2 and later, Sculpt Mode (with 5.1's Alt mask). Compared with the table above, these change in the Blender style:

To Blender style
Rotate Middle-drag, or Alt+left-drag beside the model (everywhere with Edit > Preferences > Input > Emulate 3 Button Mouse, for pens and trackpads), or left-drag beside the model
Pan Shift+middle-drag, or Alt+Shift+left-drag
Zoom Mouse wheel, Ctrl+middle-drag (up: closer), Alt+Ctrl+left-drag, Numpad Plus / Numpad Minus
Invert the brush (subtract) Hold Ctrl while sculpting
Mask / unmask Alt+drag / Ctrl+Alt+drag on the model (Blender 5.1 and later), or the Mask brush (M)
Smooth Hold Shift while sculpting
Front, right, top view Numpad 1, Numpad 3, Numpad 7; with Ctrl: back, left, bottom
Orthographic on or off Numpad 5 (the axis views turn it on until you rotate again)
Orbit in 15 degree steps, the other side Numpad 4 Numpad 6 Numpad 8 Numpad 2, Numpad 9
Frame the active Part / everything Numpad . / Home
Pick the Part to sculpt Alt+Q over it (Blender's Switch Object; Alt+click masks in this style), or a triple-click on it
Brush radius / strength F / Shift+F (drag, or type a number)
Draw, Smooth, Pinch, Inflate, Grab (Move) V, S, P, I, G
Clay Strips (Clay Block), Crease, Tendril, Scrape (Flatten) C, Shift+C, K, Shift+T
Mask brush M, then drag to mask and Ctrl+drag to unmask; M again goes back to your brush
Clear / invert the mask Alt+M / Ctrl+I
Hide or cut with a rectangle or lasso Ctrl+Shift+drag, as in the other styles (add Alt: inside); Ctrl+Shift+click the brush tile or Ctrl+Shift+B picks the shape, a Cut shape too
Hide the face group under the cursor H; Shift+H shows only it (again: everything); Alt+H shows everything
Lower / higher subdivision level Alt+1 / Alt+2 (Shift+D / D still work)
Swap colours / sample colour X / Shift+X
Smooth stroke (Lazy Stroke) Shift+S (or L)
Wireframe Shift+Z

Choosing the Blender style also sets Rotation to Turntable, as Blender orbits; change it back under Edit > Preferences > Input if you like. Blender's face sets are SculptForge's face groups, and its brushes map to the nearest SculptForge brush. Symmetry X, Paint and the material picker have no key in the Blender style (they are on the shelves); give them one with Ctrl+Alt+click. Laptops without a numpad: turn on Edit > Preferences > Input > Emulate Numpad and the number row works as the numpad.

The numpad views (Numpad 1, 3, 7, 5 ...) work in every style.

Your own Blender keymap

If you changed Blender's keys, export them in Blender (Edit > Preferences > Keymap, the Export... button next to the keymap name) and in SculptForge choose Import Blender keymap... under Edit > Preferences > Input or at the top of the Controls window. SculptForge switches to the Blender style and takes, from the file's 3D View and Sculpt keymaps, the keys of every action it has an equivalent for: the views, the brushes above, the radius and strength, the mask, hiding, subdivision levels, undo and redo. Mouse buttons and keys for things SculptForge doesn't have are left alone; the status bar says how many keys it took. The file is read as text and never run. The keys save themselves; Reset Layout and Shortcuts goes back to the defaults.

Classic sculpting keys that work differently

Most classic sculpting keys and gestures work in SculptForge with the Classic sculpting keys. The few that differ even then, because the feature works differently or doesn't exist yet:

Classic key SculptForge
P (perspective) P is the Paint brush; Numpad 5 switches to an orthographic view
T (Edit mode) Always in Edit mode: there is no 2.5D canvas
W / E / R (move, scale and rotate line) The Gizmo (see Gizmo)
1, 2, 3 (replay and record strokes) Not yet
N (list the Parts) Tool > Parts in the right tray
F1 to F6 (pop-ups) F1 is the Controls window, F3 the command palette; B, M and the left-shelf tiles pop up brushes, strokes, alphas and materials
Ctrl+E (edge loop), Ctrl+U (reload script) Export GLB and Send to Unreal
H (hide the script window) ` toggles the console

See Quick tour for experienced sculptors for the whole list.

See also