MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.
Python
Commits on main
Clarify base assembly contents and alternative compute options
6d4ea12 metrox-eth committed 1 month ago
hardware: publish V1D routed draft package and native 3D preview
a6950e9 metr0x committed 1 month ago
flight check and launchers: robot.env declares the driver and the pad layout; the check refuses a firmware built for another driver, a mute pad, a pad in another layout; the teleop launcher says YOU CAN DRIVE only after the stack trusts the pad
760e3a3 metrox committed 1 month ago
teleop launcher and flight check accept any /dev/input/js*: the pad on its cable keeps js1 after the dongle's js0
ddc333a metrox committed 1 month ago
gamepad: android/xinput layouts and MOSS_PAD_* overrides (the pad on its USB cable is an Xbox 360 pad to the kernel); bench E follows the measured speed
fb94801 metrox committed 1 month ago
firmware: MDD10A build drives the left track without the drive inversion (kept for its encoder); speed profile: --metres stop and distance by the encoders
9268898 metrox committed 1 month ago
arm: pick_low, the pick for an object lying on the floor (the jaws 21 mm above the floor instead of 62, same spot, no contact in the CAD scene with the can held); MOSS_ARM_PICK_POSE / --pick-pose play it in place of pick
1e4ad1c metrox committed 1 month ago
mission: the pick point default from the scanner's axis in the CAD scene (0.215 -0.094), and the camera's mount on the same origin in the launch
7a5ff45 metrox committed 1 month ago
base: the measured ticks per metre apply when MOSS_TICKS_PER_M is unset; an unreadable value still means no odometry
28b7b2b metrox committed 1 month ago
base: the geometry measured with the 90:1 motors (17 190 ticks per metre, 0.32 m/s at 100 %, both tracks turn from 20 %); tools/moss_speed_profile.py reads the encoders along one run and prints the rate per half second, the top rate and the time to reach it
a948777 metrox committed 1 month ago
arm adapter: torque on only after every servo's goal register is latched to its present position (a servo enables onto the goal its register holds and would jump to a stale one); bench checks the write order
2a5c0da metrox committed 1 month ago